Common Furnace Issues and Repairs

PJ MAC HVAC Service & Repair

Despite having the right unit and proper installation, there’s always the chance your furnace will malfunction. Although some problems are caused by normal wear and tear, most could be traced to inconsistent maintenance. Furnace dilemmas may create damage in your residing place, particularly during the colder weeks whenever you need to heat your interior. It’s useful to understand how to troubleshoot common issues and Furnace Repair to decide things to take care of yourself and let an expert handle.

 

Common Furnace Problems

 

Furnace is not producing heat.

 

There are many reasons why this could happen. What’s promising is that you can address many of these facets all on your own without the necessity to demand professional help. Start with starting the heat registers and then move on to examining the thermostat settings. Next, always check the furnace energy, reset the furnace or always check the company home cover. You may even investigate the filter to make sure it is free from dirt and check the standing pilot light to make sure it is lit.

 

Furnace is not producing enough heat.

 

If you see a decline in heat output, make certain the air filter is clean and in great condition. Next, inspect the different parts of the furnace for every build-up of dust, dust, and dirt, a cheap repair that could help increase performance. Also, always check the ports and channels for obstruction. Eventually, ensure the thermostat is working and positioned properly.

 

Try moving it from sunlight since this may affect temperature readings on the thermostat and lead it to misread the temperature in your home. If that occurs, your thermostat will shut off the heater too soon and leave your home sensation cold. You might also need to check on your warmth to ensure that hot air doesn’t escape from your place through various openings.

 

Odd noises from the furnace or ducts

 

Squeaking, rumbling, running, pinging, and rattling sounds are normal signals of a complex situation, clogged burner, or ventilation reduction. Noisy rattling sounds can signify the blower motor must be lubricated, while squealing could indicate a free or damaged blower belt.

 

A free blower may result in loud clanking or scraping, while dirty burners will make a noisy bang. Last but not least, grinding looks might be a signal that generator bearings need to be repaired. Because it can be difficult to ascertain the odd sounds without experience, get a specialist to inspect the machine and fix the issues.

 

Furnace runs continuously

 

Among the main reasons a furnace will run constantly is basically because something is dirty or clogged. Before repairing any problem, ensure that the thermostat settings are not at “continuous fan.” If the air filter is all set, check the furnace blower for clogging and clean it. If this does not work, have a go through the furnace blower motor and lubricate it.

 

Furnace is not blowing air.

 

If the furnace is not coming air, you’ll find so many steps you will have to take. First, make certain that the blower is without any dirt and confirm your thermostat is placed to the proper temperature. Before cleaning the air filter, check the furnace circuit breakers to ensure an electric supply. As always, if you cannot fix a furnace issue all on your own, call an HVAC professional.

Skip to toolbar